High Quality Dust Mask FFP1 Fold Flat Valved (box 20)

DESCRIPTION

Standard P1 cup mask, premium performance respiratory protection. Certified EN149:2001 +A1 2009.

• Mask boxes, valves and/or straps are colour coded for easy identification of protection levels.
• Protects against fine dust and oil or water based mists/aerosols.
• Lightweight and comfortable to wear.
• Adjustable nose bridge with foam seal.

DIRECTIONS FOR USE

1. Hold the mask in hand with the metal nosepiece up. Allow headband to hang freely.
2. Position the mask under the chin covering mouth and nose.
3. Pull the headband over the head and position behind the head.
4. Press soft metal nosepiece to conform snugly around the nose.
5. To cheeck fit, cup both hands over the mask and exhale vigorously. If air flows around nose, tighten the nosepiece. If air leaks around the edge, reposition the headband for better fit. Retest the seal and repeat the procedure until the mask is sealed properly.

CAUTIONS AND LIMITATIONS

• Not for use in atmospheres with less than 19.5% oxygen.
• Do not use in atmospheres immediately dangerous to life or health.
• Do not exceed maximum use concentrations established by regulatory standards.
• Failure to properly use and maintain this product could result in injury or death.
• All approved respirators should be selected, fitted, used and maintained in accordance with MSHA, OSHA and other applicable regulations.
• Never substitute, modify, add or omit parts in the configuration as specified by the manufacturer.

Write a review