High Quality Dust Mask FFP2 Fold Flat Valved (box 10)

DESCRIPTION

Fully UK certified to EN149:2001 +A1:2009. Adjustable nose bridge with foam seal. Colour co-ordinated straps for easy workplace identification. Space saving fold flat design and individual packaging.

DIRECTIONS OF USE

Easy to use. Check mask carefully before and during use for any damage. Replace immediately in a safe area if damaged in any way whatsoever.

1. Hold the mask in hand with the metal nosepiece up. Allow headband to hang freely and gently open mask.
2. Position the mask under the chin covering mouth and nose.
3. Pull the headband over the head and position behind the head.
4. Press the soft metal nosepiece to conform snugly around the nose.
5. To check fit, cup both hands over the mask and exhale vigorously. If air flows around nose, tighten the nosepiece . If air leaks around the edge, reposition the headband for better fit. Retest the seal and repeat the procedure until the mask is sealed properly.

CAUTIONS AND LIMITATIONS

• Not for use in atmospheres with less than 19.5% oxygen.
• Do not use in atmospheres immediately dangerous to life or health.
• Do not exceed maximum use concentrations established by regulatory standards.
• Failure to properly use and maintain this product could result in injury or death.
• All approved respirators should be selected, fitted, used and maintained in accordance with MSHA, OSHA and other applicable regulations.
• Never substitute, modify, add or omit parts in the configuration as specified by the manufacturer.

Write a review